How To Reduce The Chances Of Having Low Water Pressure In Your Shower

Low Water Pressure In Your Shower

There’s nothing more frustrating than taking a shower and feeling like you don’t have enough water pressure to wash your hair properly or to rinse off all the soap residue on your body. When water pressure becomes too low, it can be extremely difficult to get clean, which means that you could be putting yourself at risk of getting sick if you don’t take the time to thoroughly wash yourself every day in the shower. Luckily, you can do several things to reduce the chances of having low water pressure in your shower, meaning that you’ll never have to suffer through another rushed shower again!

Common Causes of Low Water Pressure

T&P Valve: Common in older homes, a T&P valve controls water pressure and temperature by mixing cold water from your pipes with hot water from your tank. Even if it’s functioning properly, it can cause slow or fluctuating pressure when you turn on your shower. Solve by replacing your valve (and keeping an eye out for leaks). Leaky Faucet: If you see a puddle after you flush your toilet or hear dripping in another room, there’s a good chance one of those taps is leaking. You might not notice because that leak is usually small—but it adds up to about 20 percent of most homes’ daily water usage.

Filters Need Replacing

If you’re noticing that water pressure in your shower has dropped, first be sure to check your filter. Most filters need to be replaced every 2-3 months, depending on usage and conditions (you might have to do it more often in places where there’s a lot of sediment). A simple way to tell if you need a new filter is by feeling if it’s harder than usual. If so, change it. You can save money by getting them at home improvement stores.

Poor Design

If your shower head is on a hose attached to a separate water pump, it’s probably a sign of low water pressure. These systems use less water than traditional showerheads and pumps, but they reduce water pressure by as much as 30 percent in order to do so. For most people, that tradeoff isn’t worth it; you won’t notice much difference in your showers if you switch back to a regular showerhead.

Bad Plumbing

Homeowners spend roughly $2000 a year on water usage; what’s more, it can cost hundreds of dollars to fix plumbing issues. Luckily, there are a few things you can do to prevent problems with low water pressure and reduce overall water consumption at home. Check out these tips below.

Rough Installation

If you haven’t had a plumber install your shower in your home, then there’s a chance that it could be jerry-rigged. If that’s what happened to you, don’t be surprised if you have low water pressure. A lot of people do that so they can save money on plumbers and other professionals. Since you can probably see where we’re going with this: it might be worth your while to get someone to come out and give it another look-see before considering anything else.

Broken Or Damaged Pipes

If your shower is suddenly running low on water pressure, it could be a broken or damaged pipe—and you could have water leaking without realizing it. If you suspect you might have a leak, first check to see if there’s visible water damage in your bathroom. If there is, turn off your water at its main source and call a plumber. Also, make sure to keep an eye out for puddles around your home; they may indicate that you have an underground leak.

Old Construction Materials

If you’re concerned about low water pressure in your shower, it might be helpful to know that older buildings tend to have worse problems with low water pressure. This is because older pipes are made of materials like lead, and if they’re in really bad shape, even small changes in temperature can cause water to expand or contract too much for proper circulation. You may want to call a plumber if you feel there could be an issue with your pipes or installation, but in many cases, you can alleviate pressure by simply adding more fixtures (i.e., installing a hand-held showerhead or fixed showerhead). You should also make sure that both of your hot and cold faucets are adjusted so they provide equal levels of pressure.

Fewer People In The House Today

You’re not alone in experiencing low water pressure at home. According to research from NRDC (Natural Resources Defense Council), nearly 30 million American homes have insufficient water pressure for basic functions like showering and flushing. That doesn’t mean that you need to live with a low-pressure shower head, though! Here are some things you can do

Conclusion

Ensure that your pipes and showerheads are free of rust and other deposits that can hinder water flow. If you’re using chlorine or chloramine-based disinfectant to treat your water, try switching over to an alternative—like a non-iodized salt-based treatment. Failing all else, consider replacing your showerhead with one with more pressure—there are many good options on Amazon for as little as $5. Choose one that matches your taste—if you prefer high-pressure showers in general, don’t get one that creates weak streams—and remember to change it out after you see rust or corrosion build up inside.


SHARE THIS

Author:

Previous Post
Next Post